To bring stabilization to boats as small as 23 feet,
we knew we had to break the mold. The new
Seakeeper 1 features a flush mount design for
easier installation, runs exclusively on 12V DC power,
and can be installed virtually anywhere on board.
~ 23' - 30'
~ 31' - 35'
~ 36' - 39'
~ 40' - 45'
~ 46' - 52'
~ 50' - 59'
~ 60' - 69'
~ 65' - 75'
~ 70' - 84'
~ 85' +
No one knows more about how you boat than you! Enter your boat information and we will guide you through the options so you can decide which Seakeeper is right for you.
| Weight | 365 lbs (165 kg) |
| Dimensions | 22.9 x 23.6 x 15.7 (inches) |
| 0.582 x 0.598 x 0.398 (meters) |
Our patented cooling system allows the flywheel to spin at an extremely high rate of speed, providing ultimate performance in the smallest and lightest package possible.
Seakeeper’s vacuum encapsulation enables the flywheel to spin roughly three times faster, cuts flywheel weight by two-thirds and halves power requirements. Moreover, because the critical components (flywheel, bearings, and motor) are sealed for life in a vacuum, they are forever isolated from the marine environment.
Seakepeeper’s active control optimizes gyro torque, providing an unsurpassed level of performance. Unlike a passively controlled gyro, which must be turned off in the roughest conditions and/or at higher speeds, the Seakeeper is effective at all speeds and can be used in all sea conditions.
Control your Seakeeper with the push of a button on our new user-friendly dash display. Not only is the display simple to use, but it integrates into your existing dash units for optimal performance.
| Max Rated Speed | 9,750 RPM |
| Angular Momentum at Max Rated RPM | 1,000 N-M-S |
| Max Anti-Rolling Torque at Max Rated RPM | 2,620 N-M |
| Spool-up Time to Max Rated RPM | 30 minutes (9,750 RPM) |
| Spool-up Time to Stabilization | 15 minutes (7,310 RPM) |
| Spool-up Power | |
| AC Input | N/A |
| DC Input | 600 Watts Max |
| Operating Power | |
| AC Input (sea state dependent) | N/A |
| DC Input | 300 - 600 Watts (Sea State Dependent) |
| AC Input Voltage (Single Phase) | N/A |
| DC Input Voltage | 12 VDC @ 55 Amps |
| Weight | 365 lbs (165 kg) Approximately |
| Envelope Dimensions | 22.9 L x 23.6 W x 15.7 H (Inches) 0.582 L x 0.598 W x 0.398 H (meters) |
| Noise Output | 62-64 dBC at 1 meter |
To ensure peace of mind, all Seakeeper products come
with a multi-year factory warranty
