We’ve done it again. We took the groundbreaking
Seakeeper 3 and made it even smaller. 25% lighter
and 20% smaller to be exact. Specially designed for
boats approximately ~30-36 feet, the Seakeeper 2
eliminates up to 95% of boat roll. Now even more
people will be able to enjoy their time out on the
water.
No one knows more about how you boat than you! Enter your boat information and we will guide you through the options so you can decide which Seakeeper is right for you.
| Weight | 414 lbs (188 kg) |
| Dimensions | 25.5 L x 24.6 W x 20.4 H (inches) |
| 0.648 L x 0.625 W x 0.518 H (meters) |
Our patented cooling system allows the flywheel to spin at an extremely high rate of speed, providing ultimate performance in the smallest and lightest package possible.
Seakeeper’s vacuum encapsulation enables the flywheel to spin roughly three times faster, cuts flywheel weight by two-thirds and halves power requirements. Moreover, because the critical components (flywheel, bearings, and motor) are sealed in a vacuum, they are isolated from the marine environment.
Seakeeper’s active control optimizes gyro torque, providing an unsurpassed level of performance. Unlike a passively controlled gyro, which must be turned off in the roughest conditions and/or at higher speeds, the Seakeeper is effective at all speeds and can be used in all sea conditions.
Control your Seakeeper with the push of a button on our new user-friendly dash display. Not only is the display simple to use, but it integrates into your existing dash units for optimal performance.
| Max Rated Speed | 9,000 RPM |
| Angular Momentum at Max Rated RPM | 2,000 N-M-S |
| Spool-up Time to Max Rated RPM | 35 minutes (9,000 RPM) |
| Spool-up Time to Stabilization | 19 minutes (6,750 RPM) |
| Power Consumption | |
| Spool-Up Power | 850 Watts Max |
| Spool-Up Power Input | 12 VDC @ 71 Amps Max |
| Operating Power | 280-850 Watts (Sea State Dependent) |
| DC Power Input | 12 VDC @ 23-71 Amps |
| Control Power | 125 Watts |
| Control Power Input | 12 VDC @ 15 Amps Max |
| Seawater Pump Power Input Over Current Protection based on installed pump rating |
12 VDC @ 15 Amps Max |
| Weight | 414 lbs (188 kg) |
| Envelope Dimensions | 25.5 L x 24.6 W x 20.4 H (inches)
0.648 L x 0.625 W x 0.518 H (meters) |
| Noise Output | ~68 dB at 1 meter |
| Seawater Supply to Heat Exchanger | 2 GPM (7.6 LPM) minimum
6 GPM (22.7 LPM) maximum |
| Ambient Air Temperature | 32° - 140° F (0° - 60° C) |
To ensure peace of mind, all Seakeeper products come
with a multi-year factory warranty
